Specifications

Setting up your
LCD monitor
Screen Adjustment
To enter adjust mode, please refer to the OSD control.
• Turn the computer and LCD monitor on.
• Press “Auto” button to start auto adjust.
• This will start the auto adjust process. This will take approximately 10
seconds. You may notice the image changing and occasionally
flashing (this is normal).
• Your LCD monitor provides a self testing function, through which you
can check whether the LCD monitor functions are working properly.
• If your LCD monitor is properly connected, but there is no image
showing and the indicator lights up in orange, please follow the below
steps:
• Shutdown the computer and the LCD monitor.
• Unplug the signal connector from the back of the computer.
• Turn the LCD monitor on.
• If the image connector is disconnected or damaged, a “No signal
input” sign will pop up on the monitor.
• Turn off the LCD monitor and reconnect the signal cable, and then
turn the computer and LCD monitor on.
• If the LED of the LCD monitor is an orange colour after completing
the steps above, please check your VGA card and computer system.
Your monitor should be operating properly.
• If the “out of range” error pops up on the monitor, the input frequency
is outside of the specified range and will not display an image. The
correct frequency will need to be entered and then restart the monitor.