Owner`s manual

nanoFlash FAQs
10-Apr-10 ©Convergent Design, Inc. Page 29 of 42
This is planned as extra cost feature, and is expected to be sold as a package with
software that controls the nanoFlash from a Mac or a PC.
Mechanical / Power / Environmental
126. What is the size and weight of nanoFlash?
The nanoFlash is camera mountable: 107 (L) x 94 (W) x 36 (H) mm (4.2 x 3.7 x 1.4”),
and the weight is approximately 0.4 kg (15 oz).
127. Can I mount nanoFlash to the back of my camcorder?
We offer a Hotshoe Ball Mount that works very well with many cameras.
We also have an IDX mount which allows the nanoFlash to attach, as if it was an IDX
battery. This allows for a physical mounting, but does not supply power. This works
especially well with the IDX “Piggyback” type battery. We offer a similar mechanical
mounting for Anton Bauer gold mounts.
We offer a custom mount for the Canon XL H1 and XL H1s.
For those with 15mm rails off the back of the camera, we offer a 15 mm rail mount,
which can also be used with an Anton Bauer Gold Mount Adapter Plate. This allows the
popular Anton Bauer Gold Mount batteries to be used.
128. Can I mount the nanoFlash in the cold/hot shoe on my camcorder?
Yes, a cold/hot shoe mount is available which can be screwed into the tripod mount on
the bottom of the nanoFlash case, see:
http://www.manfrotto.com/Jahia/site/manfrotto/pid/86
Tripod to Hot-Shoe Mount
129. When does the nanoFlash go from Active to Standby Power?