User's Manual

6
1 Product Description and installation Procedure
1.1 CS3156
1.1.1 Product Description
CS31516 is a battery-operated RTLS sensor. Rechargeable Lithium Polymer
batteries are installed for normal function. Charging interface is a 2-pin connector
via a charging cable to USB type A interface. The charging voltage is
+5VDC+/-10%.
1.1.2 Installation Procedure
Batteries are preinstalled in factory. CS3156 wakes up for a short period
during each regular interval. When there are anchors around and beacon is
detected during waking up, CS3156 will start to operate and execute RTLS
tracking. When battery power is used up, CS3156 has to be recharged via the
charging cable to a USB type A interface. It normally takes 4 hours for fully
charging. During charging, the red charge LED will be turned on and turned
off when charging is done.