User's Manual

CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0
Copyright © Convergence Systems Limited, All Rights Reserved 66
5.6.2.1 PC IP Configuration before CS208 firmware upgrade
Before firmware upgrade, user should check the IP configuration and firewall setting in PC.
1. Go to Local Area Connection Properties. Find Internet Protocol Version 4 (TCP/IPv4)
and choose Properties.
2. Choose “Use the following IP address”.
Set IP address (192.168.25.100), Subnet mask (255.255.255.0), Default gateway
(192.168.25.1 for direct connect to CS208 reader). Click OK after set.