User's Manual

CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0
Copyright © Convergence Systems Limited, All Rights Reserved 61
4. In the section [GPRS], set APN according to the country / region where CS208 is used
5. In the [SERVER] section, set static IP for target PC to be used. Normally ServerIP2 is used
for setting Internet IP address target PC / Server is connected. Therefore BackendServer
is set to 2. ServerIP1 can be ignored when ServerIP2 is used. Please note that if user set
invalid IP address in ServerIP2, CS208 will change to make connection with PC with IP
address set as ServerIP1 and send data.
ServerIP2: Set the Internet IP address provided by the Internet Service Provider in
CS208 test site.
Port: Default is 9092 for Demo App
SynchronizationInterval: Reader will send keep alive packet per this time in minute (To
the PC as server)