User's Manual

CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0
Copyright © Convergence Systems Limited, All Rights Reserved 41
5.4.5.11 Test Buzzer (2)
1. In the menu, use “2” to test Buzzer. Use “SHIFT-5” to set Buzzer Volume” and “SHIFT-8”
to set Buzzer Tone before test Buzzer.
2. The main menu is displayed again when the test is finished.
3. If the test is run with Burn-in Program, the result is displayed as below.
5.4.5.12 Test RFID Reader (3)
1. In the menu, check “3” to test RFID Reader, with Dynamic Q, Dwell, Duration
defined. (Example: Dynamic Q = 7, Dwell = 2s, Duration = 10s)
2. The Tag info is displayed continuously when RFID tag is checked.