User's Manual
Table Of Contents
- Version 1.0
- 3.1 Product Package
- 3.1.1 Basic Package Content
- 3.1.2 Product Specifications
- 4 Hardware Installation
- 5 Software Installation
- 5.1 Software Content of Shipment Package
- 5.2 PC Side Prerequisites
- 5.3 PC Side Libraries and API Document
- 5.4 Default Ex-Factory IP Settings
- 5.5 Changing IP Addresses
- 5.5.1 "Netfinder" Program Method
- 5.5.1.1 Hardware Setup
- 5.5.1.2 Software Setup
- 5.5.1.3 Search CS203 Board
- 5.5.1.4 Assign CS203 IP, Server IP and TCP Timeout
- 5.5.2 "CS203 GPIO" Program Method
- 5.6 Status Verification
- 5.7 Exception Situations
- 5.8 Finding a "Lost" CS203
- 6 Demo Applications
- 7 Middleware Connectivity
- 8 Software Upgrade
- 9 Regulatory Information
- Appendix A. RFID Basics
- Appendix B. Operation Profiles
- Appendix C. RF channels
- Appendix D. FAQ
- Appendix E. Common Mistakes
- Appendix D. Technical Support
CSL CS203ETHER-2 EPC CLASS 1 GEN 2 RFID INTEGRATED READER USER'S MANUAL, VERSION 1.0
Fig. 10. Searching CS203 Board
8.2.1.1.4 Image Update
. Select the found CS203 board. The selected one will be highlighted by a black border.
tting and press “OK”.
ful:” will be displayed as shown in Fig. 6. Remark: If
r utility
image software.
1
2. Press the “Bootloader” button.
3. Change the IP, TCP timeout se
4.
Select a *.img fire to update (Fig. 5).
5. Wait about 6-15 Seconds.
6. If success, “Transfer success
“Transfer successful:” doesn’t appear after 20 seconds, please re-open the Netfinde
and repeat the image update process from step 1 again.
7. Turn off and turn on the power of CS203 to run the new
Copyright © Convergence Systems Limited, All Rights Reserved
56