User's Manual
Table Of Contents
- Version 1.0
- 3.1 Product Package
- 3.1.1 Basic Package Content
- 3.1.2 Product Specifications
- 4 Hardware Installation
- 5 Software Installation
- 5.1 Software Content of Shipment Package
- 5.2 PC Side Prerequisites
- 5.3 PC Side Libraries and API Document
- 5.4 Default Ex-Factory IP Settings
- 5.5 Changing IP Addresses
- 5.5.1 "Netfinder" Program Method
- 5.5.1.1 Hardware Setup
- 5.5.1.2 Software Setup
- 5.5.1.3 Search CS203 Board
- 5.5.1.4 Assign CS203 IP, Server IP and TCP Timeout
- 5.5.2 "CS203 GPIO" Program Method
- 5.6 Status Verification
- 5.7 Exception Situations
- 5.8 Finding a "Lost" CS203
- 6 Demo Applications
- 7 Middleware Connectivity
- 8 Software Upgrade
- 9 Regulatory Information
- Appendix A. RFID Basics
- Appendix B. Operation Profiles
- Appendix C. RF channels
- Appendix D. FAQ
- Appendix E. Common Mistakes
- Appendix D. Technical Support
CSL CS203ETHER-2 EPC CLASS 1 GEN 2 RFID INTEGRATED READER USER'S MANUAL, VERSION 1.0
2. Change the CS203 IP and port.
3. Change the server IP and port.
4. Change the TCP timeout value.
5. Update the CS203 Bootloader.
Fig. 9. CS203 Netfinder Utility
8.2.1.1.3 Search CS203 Board
1. Press the “Search” button.
2. Available CS203 board will be listed as shown in Fig. 2.
Copyright © Convergence Systems Limited, All Rights Reserved
55