User's Manual
Table Of Contents
- Version 1.0
- 3.1 Product Package
- 3.1.1 Basic Package Content
- 3.1.2 Product Specifications
- 4 Hardware Installation
- 5 Software Installation
- 5.1 Software Content of Shipment Package
- 5.2 PC Side Prerequisites
- 5.3 PC Side Libraries and API Document
- 5.4 Default Ex-Factory IP Settings
- 5.5 Changing IP Addresses
- 5.5.1 "Netfinder" Program Method
- 5.5.1.1 Hardware Setup
- 5.5.1.2 Software Setup
- 5.5.1.3 Search CS203 Board
- 5.5.1.4 Assign CS203 IP, Server IP and TCP Timeout
- 5.5.2 "CS203 GPIO" Program Method
- 5.6 Status Verification
- 5.7 Exception Situations
- 5.8 Finding a "Lost" CS203
- 6 Demo Applications
- 7 Middleware Connectivity
- 8 Software Upgrade
- 9 Regulatory Information
- Appendix A. RFID Basics
- Appendix B. Operation Profiles
- Appendix C. RF channels
- Appendix D. FAQ
- Appendix E. Common Mistakes
- Appendix D. Technical Support
CSL CS203ETHER-2 EPC CLASS 1 GEN 2 RFID INTEGRATED READER USER'S MANUAL, VERSION 1.0
8 Software Upgrade
8.1 Upgrade of PC Side Libraries
On the PC side, there are 4 dll libraries required:
5. RFID_XP.dll
6. rfid.dll
7. rfidtx.dll
8. cpl.dll
The main dll library that user application has to call is the RFID_XP.dll. This is a C# library
under Dot Net Compact Framework. The other 3 dlls are called by RFID_XP.dll
For upgrading, just copy the latest versions of these 4 dll libraries to the appropriate Visual
Studio directory and then recompile and create new installer (.msi file). The end customer
can then take this new installer and then install into their PC.
Copyright © Convergence Systems Limited, All Rights Reserved
53