User's Manual
Table Of Contents
- Version 1.0
- 3.1 Product Package
- 3.1.1 Basic Package Content
- 3.1.2 Product Specifications
- 4 Hardware Installation
- 5 Software Installation
- 5.1 Software Content of Shipment Package
- 5.2 PC Side Prerequisites
- 5.3 PC Side Libraries and API Document
- 5.4 Default Ex-Factory IP Settings
- 5.5 Changing IP Addresses
- 5.5.1 "Netfinder" Program Method
- 5.5.1.1 Hardware Setup
- 5.5.1.2 Software Setup
- 5.5.1.3 Search CS203 Board
- 5.5.1.4 Assign CS203 IP, Server IP and TCP Timeout
- 5.5.2 "CS203 GPIO" Program Method
- 5.6 Status Verification
- 5.7 Exception Situations
- 5.8 Finding a "Lost" CS203
- 6 Demo Applications
- 7 Middleware Connectivity
- 8 Software Upgrade
- 9 Regulatory Information
- Appendix A. RFID Basics
- Appendix B. Operation Profiles
- Appendix C. RF channels
- Appendix D. FAQ
- Appendix E. Common Mistakes
- Appendix D. Technical Support
CSL CS203ETHER-2 EPC CLASS 1 GEN 2 RFID INTEGRATED READER USER'S MANUAL, VERSION 1.0
6 Demo Applications
6.1 Introduction
This document will describe the details about the CS203 demo application program
(CS203_Callback-API_DemoApp) that is based on the Callback-Based API set. Software
developers can refer to this demo program for programming CS203 based on this new set of
API.
6.2 Program Structure
The shipment package consists of the following directories:
CS203 GPIO Demonstrate the GPIO and IP setting function of the
reader
CS203 Start Stop Debug Demonstrate start stop reader function
CS203 CALLBACK API
DEMO
Demonstrate basic operation of the reader. E.g., inventory,
read and write etc...
CSL Library All necessarily dll library files will put to this folder
Document User Documents: API Library manual, User Manual, etc.
Copyright © Convergence Systems Limited, All Rights Reserved
33