User's Manual
Table Of Contents
- Version 1.0
- 3.1 Product Package
- 3.1.1 Basic Package Content
- 3.1.2 Product Specifications
- 4 Hardware Installation
- 5 Software Installation
- 5.1 Software Content of Shipment Package
- 5.2 PC Side Prerequisites
- 5.3 PC Side Libraries and API Document
- 5.4 Default Ex-Factory IP Settings
- 5.5 Changing IP Addresses
- 5.5.1 "Netfinder" Program Method
- 5.5.1.1 Hardware Setup
- 5.5.1.2 Software Setup
- 5.5.1.3 Search CS203 Board
- 5.5.1.4 Assign CS203 IP, Server IP and TCP Timeout
- 5.5.2 "CS203 GPIO" Program Method
- 5.6 Status Verification
- 5.7 Exception Situations
- 5.8 Finding a "Lost" CS203
- 6 Demo Applications
- 7 Middleware Connectivity
- 8 Software Upgrade
- 9 Regulatory Information
- Appendix A. RFID Basics
- Appendix B. Operation Profiles
- Appendix C. RF channels
- Appendix D. FAQ
- Appendix E. Common Mistakes
- Appendix D. Technical Support
CSL CS203ETHER-2 EPC CLASS 1 GEN 2 RFID INTEGRATED READER USER'S MANUAL, VERSION 1.0
4.3 Operating Setup
CS203ETHER-2 has two power up modes: POE mode and 12V power supply mode.
To PC
Figure 2-5 POE adaptor Setup
The reader is connected to POE adaptor’s output port via the cable provided in the package.
The input port of POE adaptor is connected to a host computer.
Copyright © Convergence Systems Limited, All Rights Reserved
11