User's Manual

CSL CS101-2 EPC CLASS 1 GEN 2 RFID HANDHELD READER USER'S MANUAL, VERSION 1.0
Copyright © Convergence Systems Limited, All Rights Reserved
85
[in] antennaPort: always = 0 for CS101.
[out] portStatus: enabled/disabled.
Description:
This is the data structure for f_RfidDev_AntennaPortGetStatus operation.
RFID_AntennaPortSetState_T
Prototype:
public struct RFID_AntennaPortSetState_T{
public RFID_RADIO_HANDLE handle;
public UInt32 antennaPort;
public RFID_ANTENNA_PORT_STATE state;
public HRESULT_RFID_STATUS status;
};
Fields:
[in] antennaPort: always = 0 for CS101.
[in] state: enabled / disabled.
Description:
This is the data structure for f_RfidDev_AntennaPortSetState operation.
RFID_AntennaPortGetSetConfiguration_T
Prototype:
public struct RFID_AntennaPortGetSetConfiguration_T{
public RFID_RADIO_HANDLE handle;
public UInt32 antennaPort;
public RFID_ANTENNA_PORT_CONFIG config; // [const struct*]
public HRESULT_RFID_STATUS status;
};
Fields:
[in] antennaPort: always 0 for CS101 .
[in/out] config: the structure to be configured.
Description:
This is the data structure for
f_RfidDev_AntennaPortGetConfiguration /
f_RfidDev_AntennaPortSetConfiguration operation.
RFID_18K6CSetSelectCriteria__T
Prototype:
public struct RFID_18K6CSetSelectCriteria__T{