User's Manual

CSL CS101-2 EPC CLASS 1 GEN 2 RFID HANDHELD READER USER'S MANUAL, VERSION 1.0
Copyright © Convergence Systems Limited, All Rights Reserved
79
public enum RFID_RADIO_GPIO_PIN: uint {
RFID_RADIO_GPIO_PIN_0 = 0x00000001<< 0, // SET_BIT(0),
RFID_RADIO_GPIO_PIN_1 = 0x00000001<< 1, // SET_BIT(1),
RFID_RADIO_GPIO_PIN_2 = 0x00000001<< 2, // SET_BIT(2),
RFID_RADIO_GPIO_PIN_3 = 0x00000001<< 3, // SET_BIT(3),
RFID_RADIO_GPIO_PIN_4 = 0x00000001<< 4, // SET_BIT(4),
RFID_RADIO_GPIO_PIN_5 = 0x00000001<< 5, // SET_BIT(5),
RFID_RADIO_GPIO_PIN_6 = 0x00000001<< 6, // SET_BIT(6),
RFID_RADIO_GPIO_PIN_7 = 0x00000001<< 7, // SET_BIT(7),
RFID_RADIO_GPIO_PIN_8 = 0x00000001<< 8, // SET_BIT(8),
RFID_RADIO_GPIO_PIN_9 = 0x00000001<< 9, // SET_BIT(9),
RFID_RADIO_GPIO_PIN_10 = 0x00000001<<10, // SET_BIT(10),
RFID_RADIO_GPIO_PIN_11 = 0x00000001<<11, // SET_BIT(11),
RFID_RADIO_GPIO_PIN_12 = 0x00000001<<12, // SET_BIT(12),
RFID_RADIO_GPIO_PIN_13 = 0x00000001<<13, // SET_BIT(13),
RFID_RADIO_GPIO_PIN_14 = 0x00000001<<14, // SET_BIT(14),
RFID_RADIO_GPIO_PIN_15 = 0x00000001<<15, // SET_BIT(15),
RFID_RADIO_GPIO_PIN_16 = 0x00000001<<16, // SET_BIT(16),
RFID_RADIO_GPIO_PIN_17 = 0x00000001<<17, // SET_BIT(17),
RFID_RADIO_GPIO_PIN_18 = 0x00000001<<18, // SET_BIT(18),
RFID_RADIO_GPIO_PIN_19 = 0x00000001<<19, // SET_BIT(19),
RFID_RADIO_GPIO_PIN_20 = 0x00000001<<20, // SET_BIT(20),
RFID_RADIO_GPIO_PIN_21 = 0x00000001<<21, // SET_BIT(21),
RFID_RADIO_GPIO_PIN_22 = 0x00000001<<22, // SET_BIT(22),
RFID_RADIO_GPIO_PIN_23 = 0x00000001<<23, // SET_BIT(23),
RFID_RADIO_GPIO_PIN_24 = 0x00000001<<24, // SET_BIT(24),
RFID_RADIO_GPIO_PIN_25 = 0x00000001<<25, // SET_BIT(25),
RFID_RADIO_GPIO_PIN_26 = 0x00000001<<26, // SET_BIT(26),
RFID_RADIO_GPIO_PIN_27 = 0x00000001<<27, // SET_BIT(27),
RFID_RADIO_GPIO_PIN_28 = 0x00000001<<28, // SET_BIT(28),
RFID_RADIO_GPIO_PIN_29 = 0x00000001<<29, // SET_BIT(29),
RFID_RADIO_GPIO_PIN_30 = 0x00000001<<30, // SET_BIT(30),
RFID_RADIO_GPIO_PIN_31 = 0x80000000 //1<<31 // SET_BIT(31)
};
Description:
This is the bit mask values for the radio module GPIO pins.
RFID_Startup_EMULATION_FLAG