User's Manual

CSL CS101-2 EPC CLASS 1 GEN 2 RFID HANDHELD READER USER'S MANUAL, VERSION 1.0
Copyright © Convergence Systems Limited, All Rights Reserved
40
6.4.9 RFID Configuration
The RFID Configuration allows the user to set parameters for the Inventory, Tag Memory,
Frequency, Link Profile, Antenna and Overheat Protection.
Inventory Setup:
Session: Session number must be different from reader to reader if they are pointing into the
same zone.
Est. Tag Population Size: it is the estimated population of tags to be read at a time.
Tag Filter Mask: Set the filter to select the tags that you want to read/write in the tag inventory
submenu.
Figure 6-24 RFID Configuration – Inventory Setup