User's Manual

CSL CS101-2 EPC CLASS 1 GEN 2 RFID HANDHELD READER USER'S MANUAL, VERSION 1.0

189

avoided. Remember to select different session numbers for readers to avoid tag replying

wrongly to other reader.

2. If dense reader mode is not required, Profile 0 should be used as it allows the fastest tag

read.

3. Adjust the power of reader to take a balance between read range and cross read effect.

4. Employ inspection process for identifying malfunction reader. For example, reading

testing tags from all readers and then collecting the read data from edge server. Analysis

of the data helps assessing the reader health.

5. Remote reboot of reader and remote control of power grid should be supported since the

readers may distribute in vast area.

6. During network failure, reader is not able to send tags read to trusted server. If Network

Failure Data Backlog is enabled, those tags are buffered in the reader. Backlog tags are

sent to trusted server after the TCP connection is re-established. Therefore, system

integrators should also provide application level failover for this feature.