User's Manual

CSL CS101-2 EPC CLASS 1 GEN 2 RFID HANDHELD READER USER'S MANUAL, VERSION 1.0

170

10.2.5 Software Configuration

Software configuration of the reader is very important – it ensures the reader will operate

exactly as the business process requires, not more or not less.

The following page has a flowchart that the system integrator needs to go through in order to

set up the software.

The first step is to configure the users parameter, such as operator name, ID, password, etc. The

second step is to configure the networking parameters, such as IP addresses, access point SSID,

etc. The third step is to configure system parameters, such as reader ID, frequency setting, tag

baud rate, capture mode, etc.

The third step is to configure time and time filter, such as system date and time (hour, minute

and second), time filter (define various time intervals, time slots, repeat modes), etc. The

fourth step is to configure capture point, such as capture point type, capture point area, capture

point details.

The fifth step is to configure IO, such as sensor input name, control output name, default

positions, etc. The sixth step is to configure tag and tag filtering, such as tag group, tag filter,

etc. The seventh step is to configure audio and video, such as audio messages and video

messages resident path (remote or local).

The eighth step is to configure event, such as triggering logic, resultant action, event

sequencing, etc. The ninth step is to configure database, such as database fields, etc. The

tenth step is to configure report, such as report definition, etc.

The eleventh step is to configure statistics, such as parameters for long term monitoring, etc.

The twelfth step is to back up the set up into a standard configuration set up file.