User Manual

8.
Comfort mode.
When the thermostat is in Comfort mode, the
heater will maintain the set temperature (19.0°C
66.0°F) without responding to any Programmer
instruction.
To change the set temperature, simply press the
+ or – keys to change the setting in steps of 0.5°.
Exception to the Comfort mode :
If the heater is connected to a Programming system, it will still respond to a Frost
Protection instruction.
To select the Comfort Mode :
Press the Mode key several times until the set temperature value appears on the
display (19.0°C. 66.0°F,...).
Eco mode.
When the heater is in Eco Mode, it will maintain
the temperature at a lower value. This setting is
useful to reduce energy consumption at night or
when a room is temporarily unused.
To select the Eco mode :
Press the Mode key briey until the word Eco
appears on the display.
To display the Eco temperature setting :
While in Eco mode, press the + or – key. The Eco
temperature setting will appear on the display (the
default setting is 3.5°C or 7°F below the Comfort
temperature).
Mode
Mode
Mode