User Manual

10.
Mode
Program Mode :
This mode allows the heater to respond to
instructions from a central Programmer system
or from an individual Programmer module. The
thermostat display will show the instruction being
received (see summary table below).
To select the Program Mode :
PresstheModekeybrieyuntilthedisplayshowsthetemperaturesettingwith
the letter P on the top right of the screen (19.0 or 66.0, for instance).
The temperature is equal to the Comfort setting. To modify the set temperature,
simply press the + or – keys.
Suggestion :
For better comfort, we recommend that you keep this heater on the Programming
Mode.
This function allows your heater to react automatically to instructions sent by a
central Programmer System or by an individual Programmer module inserted in
the slot located next to the thermostat.
PROGRAMMER
INSTRUCTION
HEATER
DISPLAY
RESULTING MODE
Standby OFF Shuts off the heating function.
Setback on ECO Temperature is lowered by 3.5°C (7°F)
from the comfort setting (or as selected).
Frost Protection on HG Maintains the room temperature at 7°C
(45°F).
SUMMARY TABLE OF PROGRAMMING MODES SENT BY
A PROGRAMMER :
Note :
Frost Protection instructions from a Programming system will override all other
settings even if a heater is not set in the Program Mode.
In that case, the heater screen will display the appropriate symbol (see table
above) but the symbol «
»willbeashing.