Datasheet

V1.0 – 27.04.2017
Shock response
15 g, 11 ms half sinus all 3
axes
I/O:
Supply voltage
24 V
USB (Power for programming only)
USB-B, 2.0
Ethernet
RJ45, 10/100Mbps
Analog inputs
2x 0-10 V
Analog outputs
2x 0-10 V or 0-20 mA
Inputs, no galvanic insulation
Common analog/digital
Digital
Fixed digital, ext. Interrupt usable
18
12
4
2
Digital Outputs, no galvanic insulation
Relay outputs
8
10
PIN Header, no Galvanic insulation
Logic level Input
Logic level Output
Communication
Internal Power
12 parallel to terminal Inputs
12 parallel to terminal Outputs
SPI, 2xUART, I2C, Reset
+3,3 V, +5 V, ARef, GND
Terminal capacities:
Relay Output, Power Input
Strip length
Max. tightening torque
2,5 mm² (24-12AWG)
6-7 mm
0,5 Nm
Digital, Analog Input Output
Strip length
Max. tightening torque
1,5 mm² (30-16AWG)
5-6 mm
0,2 Nm
Pin header connector
2x 26 Pin, Dual row, 2.54 pitch
Protection:
ESD HBM Class 0
Contact discharge: ±4 kV
Air discharge: ±8 kV
Supply input over current protection
Internal Fuse 20 A (fast)
Relay Output
External Fuse required
Digital Output
Overload, short circuit, ESD
Signal Input
Overvoltage, ESD
Pin header connector
Current +5 V, +3,3 V
ESD
total 200 mA, resettable fuse