Instructions

CONTROLLINO Instruction Manual Page 4 (35)
Intended use
The CONTROLLINO PLC is a small computer (μC = microcontroller) with peripherals based on the
"Open-Source Arduino platform". It is installed in a DIN rail housing.
With this product various control and automation tasks can be solved. You have to create appro-
priate programmes to do this.
On the manufacturers website of CONTROLLINO (http://www.controllino.biz) you will find vari-
ous demo programs and libraries that will get you started with programming.
For the connection of external sensors and devices always mind the corresponding sections in
this manual.
Any use other than described in this manual is not permitted. Besides possible damages to the
device, this is also associated with dangers like short circuit or electric shock.
The CONTROLLINO PLC must not be altered or modified. The safety instructions as well as the
maximum permissible operating and ambient conditions given in the chapter "technical data"
must be observed.
Read the whole instruction manual carefully and attentive. It contains important information on
mounting, operating and handling your CONTROLLINO.
Information on the manufacturer and on CONTROLLINO controllers can be found here:
http://www.controllino.biz