Datasheet

V1.0 – 10.06.2015
SG-Tronic GmbH [e-mail]
Trientlgasse 18c, 6020 Innsbruck, Austria www.sg-tronic.com
I/O:
Supply voltage
12V or 24V
USB (Power for programming only)
USB-B, 2.0
Ethernet
RJ45, 10/100Mbps
RS485 (no termination inside)
250kb
Inputs, no galvanic insulation
Common analog/digital
Fixed digital, ext. Interrupt usable
12
10
2
Digital Outputs, no galvanic insulation
Relay output
12
10
PIN Header, no Galvanic insulation
Logic level Input
Logic level Output
Communication
Internal Power
12 parallel to terminal Inputs
12 parallel to terminal Outputs
SPI, 2xUART, I2C, Reset
+3,3V, +5V, ARef, GND
Terminal capacities:
Relay Output, Power Input
Strip length
Max. tightening torque
2,5mm² (24-12AWG)
6-7mm
0,5Nm
Digital, Analog Input Output
Strip length
Max. tightening torque
1,5mm² (30-16AWG)
5-6mm
0,2Nm
Pin header connector
2x 26 Pin, Dual row, 2.54 pitch
Protection:
ESD HBM Class 0
Contact discharge: ±4kV
Air discharge: ±8kV
Supply input over current protection
Internal Fuse 20A
Relay Output
External Fuse required
Digital Output
Overload, short circuit, ESD
Signal Input
Overvoltage, ESD
Pin header connector
Current +5V, +3,3V
ESD
total 200mA, resettable fuse