Instruction Manual

Installer Menu
3-22 SwingSmart DC Installation and Reference Manual Revision E
Table 3-2. Smart DC Controller - Installer Menu Functions
Ref. No. *
Installer Menu
Setting Options
(
Bold = Factory Settings
)
Tasks and Explanations
Associated
DC Controller
Connections
Display
1
0 = Gate disabled 1 =
Residential 1 to 4 units
2 = Comm./public access 3 = Light industrial 4 = Industrial secure
Assign the operator’s Usage Class designation per UL 325 standards. See Identifying Gate Operator Category and Usage Class. The installer must designate a usage class before the
operator will function. See Configuring the Setup Menu.
Not applicable (N/A)
2
0 = Gate disabled R = Right hand L = Left hand
The handing determines which way the gate opens as you view it from the operator side. See Adjusting the Limit Switches. The installer must designate a left or right handing before the operator will function. See Configuring the Setup Menu.
(N/A)
3
0 = Gate disabled 1 = 0 to 300lbs. 2 = 301 to 600lbs. 3 = 601 to 800lbs. 4 = 800 to 1300lbs.
Select the gate’s weight range in pounds. The installer must designate the gate’s weight before the operator will function. See Configuring the Setup Menu. Designating the
correct gate weight allows the operator to determine the appropriate acceleration and deceleration rates.
(N/A)
4
0 = Gate disabled 1 = 0 to 8 feet 2 = 8 to 12 feet 3 = 12 to 16 feet 4 = 16 to 20 feet
Select the gate’s length in feet. The installer must designate the gate’s length before the operator will function. See Configuring the Setup Menu. Designating the correct gate length allows the operator to determine the appropriate acceleration and deceleration rates.
(N/A)
UC 0 USAGE CLASS
SH 0 GATE HANDING
SH 0 GATE HANDING WT 0 GATE WEIGHT (LB)
SH 0 GATE HANDING LN 0 GATE LENGTH (FT)