Instruction Manual

User Menu

3-8 SwingSmart DC Installation and Reference Manual Revision E

SER

ENU

The User Menu consists of twelve functions which can be modified using the Smart DC Controller buttons.

Refer to

Using the Smart DC Controller Buttons In Menu Mode

To access the User Menu, take the following steps:

1. At a gate status display, press the MENU button.

Eight operator status displays scroll past and the

CLOSE TIMER display appears.

Note:

To access the User Menu, the operator must be in

Run Mode. The motor cannot be engaged and the gate

cannot be moving.

2. To bypass the operator status displays and access the

User Menu, press the MENU button twice.

The CLOSE TIMER display appears.

In the pages that follow, a detailed view of the more commonly used menus is provided:

• Adjusting the Close Timer

• Setting the Time & Date

• Setting the AC Power Loss Gate Function

• Adjusting the Display Contrast

Table 3-1 on page 3-13 describes the User Menus, supplies the factory defaults, and references the hard-wire

connections.

For information on how the menu buttons function, review

Using the Smart DC Controller Buttons In Menu

Mode.

CT 0 (OFF)

CLOSE TIMER

OPEN

STOP

RESET

SELECT