Owner manual

www.hysecurity.com Display Menu D0536 Rev. B 3-11
settIng tHe tIme and date
AfeatureoftheSmartDCControllerisits24-hour,365dayclock.Makesureitissettotheappropriatetime
zone.Anaccuratetimeanddateallowsthediagnosticlogtodatestampoperationaldatawhichindicateswhen
Alerts,FaultsandErrorsoccur.TheloghelpsintroubleshootingandcanbeviewedusingtheS.T.A.R.T.software
applicationviaalaptopconnectedtotheUSBorRS-232port.Formoreinformation,referto“SmartTouch
AnalyzeandRetrieveTool(S.T.A.R.T.)”onpage6-1.
To set or adjust the time or date, take the following steps:
1. Atagatestatusdisplay,presstheMENUbuttontwice.This
accessestheUserMenuandtheCLOSETIMERdisplayap-
pears.
2. PressNEXTorPREVuntiltheSETCLOCKdisplayappears.
3. PressSELECT.
4. CL blinks.
5. PressNEXTorPREVtochangethenumberto1.
6. PressSELECTtoacceptthedisplay.
7. Thedateandtimedisplayappears.UsetheSELECTand
NEXTbuttonsinthesamemannerasbeforetoadjustthe
date and time.
NOTE: A date or time eld must be blinking before it
can be changed.
8. To accept what appears on the date and time display, press
SELECT.
9. ToexittheUserMenu,presstheMENUbutton.Agatestatus
appears in the display indicating you have returned to Run
Mode.
NOTE: A lithium coin battery supports the clock so the date and
time is retained even when the main power is turned off. Replace
the battery about every ve years with a DL 2025, DL 2032 or
CR 2025 or CR 2032 battery. Refer to Clock Battery Replacement.
CL 1
SET CLOCK
OPEN
CLOSE
STOP
MENU
RESET
PREV
NEXT
SELECT
01/05/13 00:00
^^
OPEN
CLOSE
STOP
MENU
RESET
PREV
NEXT
SELECT
CT 0 (OFF)
CLOSE TIMER
OPEN
CLOSE
STOP
MENU
RESET
PREV
NEXT
SELECT
HYSECURITY
GATE CLOSED
OPEN
CLOSE
STOP
MENU
RESET
PREV
NEXT
SELECT