Owner manual

3-6 D0536 Rev. B StrongArmPark DC: Programming & Operations Manual www.hysecurity.com
User Menu Setting Options Menu Tasks & Explanations SDC Wire
Connections
DS 0 (OFF)
Diagnostic Logs
0 = off
1=detailed
Set to 0, the SDC logs pertinent operator events
such as faults, errors, or menu manipulation. When
experiencing intermittent problems, set this item to
1torecordalloperatoropenandcloseevents,in
addition to the normal alert, fault and error logs. This
parameter automatically resets to the default 0 (off)
after 24 hours.
USB or RS-232 cable
and laptop computer
loaded with HySecurity
freeS.T.A.R.T.softwareis
required to read the log
le.
Visitwww.hysecurity.com
PD 0 
Set Password
0 = Off
1=On,SetPassword
To enter a password (up to 80 characters) for
networkconnectivity,select1.Youcanusethemenu
navigationbuttonstoenterthepassword(SELECT,
NEXT,SELECT).Whenthepasswordisset,the
display returns to the 0 setting.
NOTE:ASystemAddress(SA)valueintheInstaller
Menu must be set before the Set Password display
can appear in the User Menu.
Network:Ethernetor
RS-485
Installer menu
TheInstallerMenuoptionsprovidemoreadvancedcongurationsfor
thegateoperators.AccesstotheInstallerMenuisthroughtheUser
Menu. The navigational buttons are the same in both menu modes.
Access:
WhileastaticRunModecodeisbeingdisplayed,presstheMENU
button twice. (Bypasses the operator status displays.)
When the Close Timer display appears:
1. AccesstheInstallerMenubysimultaneouslypressingandhold-
ingtheRESETandOPENbuttons.
2. Release both buttons and the Learn Limit display appears. The
LLdisplayistherstitemintheInstallerMenu.
NOTE: Installer Menu options can also be congured through the use of a lap-
top computer and the S.T.A.R.T. software.
Table 2 describes the Installer Menu items and supplies the factory defaults. (Factory settings shown in bold.)
CT 0 (OFF)
CLOSE TIMER
OPEN
CLOSE
STOP
MENU
RESET
PREV
NEXT
SELECT
LL 0 (OFF)
LEARN LIMIT
OPEN
CLOSE
STOP
MENU
RESET
PREV
NEXT
SELECT