Manual

1
TABLE OF CONTENTS
SAFETY 1-7
Safety Symbol and Signal Word Review 1
UL325 Model Classifications 2
Safety Installation Information 3
Gate Construction Information 4
Required Safety Protection Devices 5
Important Safety Information 6-7
INTRODUCTION 8
Operator Specifications 8
Carton Inventory 8
Hardware Inventory 8
INSTALLATION 9-14
Site Preparation 9
Types of Installations 9
Standard Installation 10-11
Compact Installation Only 12-13
Standard and Compact Installation 14
WIRING 14-17
Earth Ground Rod 14
Power Wiring 15-16
Connect Batteries 16
Primary/Secondary Operators 17
ADJUSTMENT 18-23
Learn Limits 18-22
Force Adjustment 23
Test 23
PROGRAMMING 24
Remote Controls 24
Keyless Entry 24
Erase All Codes 24
Alternate Radio Receiver Installation 24
ADDITIONAL FEATURES 25-26
Timer-To-Close 25
Auto Open Jumper 25
Heater 25
Party Mode 25
Entrapment Protection Devices 26
OPERATION AND MAINTENANCE 27-28
Manual Disconnect 27
Reset Button 27
Remote Control 27
Sleep Mode 27
Maintenance 28
Battery 28
TROUBLESHOOTING 29-30
Diagnostic Error Codes Chart 29
Troubleshooting Chart 30-31
Wiring Diagram 32
ACCESSORIES 33-34
WARRANTY BACK COVER
MECHANICAL
ELECTRICAL
SAFETY » SAFETY SYMBOL AND SIGNAL WORD REVIEW
When you see these Safety Symbols and Signal Words on the following pages, they
will alert you to the possibility of serious injury or death if you do not comply with
the warnings that accompany them. The hazard may come from something
mechanical or from electric shock. Read the warnings carefully.
When you see this Signal Word on the following pages, it will alert you to the
possibility of damage to your gate and/or the gate operator if you do not comply
with the cautionary statements that accompany it. Read them carefully.
IMPORTANT NOTE
• BEFORE attempting to install, operate or maintain the operator, you must read and
fully understand this manual and follow all safety instructions.
• DO NOT attempt repair or service of your gate operator unless you are an
Authorized Service Technician.