Owner manual

10-1/2"
20-3/8"
20-3/8"
INTRODUCTION » OPERATOR SPECIFICATIONS + CARTON INVENTORY + HARDWARE INVENTORY
This model is intended for use in vehicular slide gate applications:
SIDE VIEW
REAR VIEW
Gate Classifications: CLASS I & II
Main Supply (Motor): 12 Vdc
Accessory Power: 12 V nominal Class II battery
voltage source is limited to:
•
Solar or AC Cable up to
50 feet - 500 mA
• AC Cable 50 feet up to
250 feet - 250 mA
• AC Cable 250 feet up to
1000 feet - 100 mA
NOTE: Increased accessory power drawn from
the operator will shorten the battery life.
Current Consumption: 5 Amps at 120 Vac
Battery Charger Supply: 13.5 Vac, 30 Va, Direct Plug in
Power Supply, Class II Compliant
Heater Draw (Optional): 325 watts
Main AC Supply: 120 Vac
DC Absorbed Power: 2 Amps
Solar Power Max: 12 V at 30 watts max.
Maximum Gate Speed: 1 foot/second
Maximum Gate Weight: 800 lb.
Daily Cycle Rate using
transformer power: 120 cycles/day
Maximum Gate Travel
Distance: 25 feet max. (Single Gate)
NOTE: The operator is equipped for a 20 foot
standard gate, to obtain 25 feet an additional
chain is required.
40 feet (Dual Gate)
Temperature: -20°C to 40°C (-4°F to 104°F)
without Heater
-40°C to 40°C (-40°F to 104°F)
with Heater
Control Board Fuse: 30 Amp (2)
OPERATOR SPECIFICATIONS
5-4/5"
20-1/2"
24"
7-1/4"
16-3/5"
16-4/5"
15-3/16"
13.65"
MOUNTING FOOTPRINT
7.49"
(Electrical
Box)
.63"
CARTON INVENTORY
• Operator
• Transformer
• Documentation Packet
• Battery 12 Vdc 7AH (1)
HARDWARE INVENTORY
• Warning Signs (2)
• Warranty Card
• Chain #41 - 30 feet
• Eye Bolt Kit
8