Owner manual

When you see these Safety Symbols and Signal Words on the following pages, they
will alert you to the possibility of serious injury or death if you do not comply with
the warnings that accompany them. The hazard may come from something
mechanical or from electric shock. Read the warnings carefully.
When you see this Signal Word on the following pages, it will alert you to the
possibility of damage to your gate and/or the gate operator if you do not comply
with the cautionary statements that accompany it. Read them carefully.
IMPORTANT NOTE
• BEFORE attempting to install, operate or maintain the operator, you must read
and fully understand this manual and follow all safety instructions.
• DO NOT attempt repair or service of your gate operator unless you are an
Authorized Service Technician.
MECHANICAL
ELECTRICAL
SAFETY » SAFETY SYMBOL AND SIGNAL WORD REVIEW
TABLE OF CONTENTS
SAFETY 1-7
Safety Symbol and Signal Word Review 1
UL325 Model Classifications 2
Safety Installation Information 3
Gate Construction Information 4
Required Safety Protection Devices 5
Important Safety Information 6-7
INTRODUCTION 8
Operator Specifications 8
Carton Inventory 8
Hardware Inventory 8
INSTALLATION 9-11
Site Preparation 9
Types of Installations 9
Determine Location for Concrete Pad and Operator 10
Concrete Pad and Operator Attachment 10
Attach the Gate Brackets and Chain 11
WIRING 11-14
Earth Ground Rod 11
Power Wiring 12-13
Connect Batteries 13
Primary/Secondary Operators 14
ADJUSTMENT 15-20
Learn Limits 15-19
Force Adjustment 20
Test 20
PROGRAMMING 21
Remote Controls 21
Keyless Entry 21
Erase All Codes 21
Alternate Radio Receiver Installation 21
ADDITIONAL FEATURES 22-23
Timer-To-Close 22
Auto Open Jumper 22
Heater 22
Party Mode 22
Entrapment Protection Devices 23
OPERATION AND MAINTENANCE 24-25
Reset Switch 24
Remote Control 24
Sleep Mode 24
Maintenance 25
Battery 25
Drive Chain 25
TROUBLESHOOTING 26-29
Diagnostic Error Codes Chart 26
Troubleshooting Chart 27-28
Wiring Diagram 29
ACCESSORIES 30
WARRANTY BACK COVER
1