Controlled Products Systems Group PR-112S-A : Owner manual : Page 6

ENFORCER Stand-Alone Proximity Reader Manual ENFORCER Stand-Alone Proximity Reader Manual

1. Add a new user card:

Action Reaction

Tap a master card 1 time 2 quick beeps, LED flashes green

Wait 3 seconds 1 beep, green flashes continue

Tap a blank card 1 time 1 beep, the card is now a user card

Tap more blank cards 1 time 1 beep for each new user card

each to create more user cards

Exit -- To exit programming mode, tap a master card 1 time or wait 15 seconds.

NOTE

--

Attempting to add a previously-learned user card or master card will cause the

unit to beep twice and the LED to flash red.

2. Delete the user card following this user card:

Use this to delete a user card that was not returned by an employee

Action Reaction

Tap a master card 2 times 2 quick beeps, 1 more beep, LED flashes green

Wait 3 seconds 2 beeps, green flashes continue

Tap the user card that was added 2 quick beeps, the desired user card is deleted

just before the card to be deleted

Exit - To exit programming mode, tap a master card 1 time or wait 15 seconds.

NOTE

--

Attempting to delete a blank card or a master card will cause the unit to beep

twice and the LED to flash red.

3. Delete this user card:

Use this to delete a user card that is in your possession

Action Reaction

Tap a master card 3 times 2 quick beeps, 2 more beeps, LED flashes green

Wait 3 seconds 3 beeps, green flashes continue

Tap the user card to be deleted 3 quick beeps, the user card is deleted

Exit -- To exit programming mode, tap a master card 1 time or wait 15 seconds.

NOTE

--

Attempting to delete anything other than a user card will cause the unit to beep

twice and the LED to flash red.

4. Delete all user cards:

Action Reaction

Tap a master card 4 times 2 quick beeps, 3 more beeps, LED flashes green

Wait 3 seconds 4 beeps, green flashes continue

WITHIN 3 SECONDS, 4 quick beeps, all user cards are deleted

tap the master card again

The unit automatically exits to standby mode

5. Add a new master card:

(Warning: master cards cannot be deleted)*

Action Reaction

Tap a master card 5 times 2 quick beeps, 4 more beeps, LED flashes green

Wait 3 seconds 5 beeps, green flashes continue

Tap a blank card or a user card 2 beeps, the card is now a master card

Tap more blank or user cards 1 time 2 beeps for each new master card

each to create more master cards

Exit -- To exit programming mode, tap a master card 1 time or wait 15 seconds.

6. Set the door-release timer:

Action Reaction

Tap a master card 6 times 2 quick beeps, 5 more beeps, LED flashes green

Wait 3 seconds 6 beeps, green flashes continue

Count the beeps 1 beep = 1 second for the door release timer

Tap the master card to stop the beeps The timer is now set for the number of seconds

equal to the number of beeps

The unit automatically exits to standby mode

7. Show me how many user cards have been programmed:

Action Reaction

Tap a master card 7 times 2 quick beeps, 6 more beeps

Wait 3 seconds 7 beeps, green flashes continue

Wait 1.5 seconds Silence

Count beeps for the first digit Long beep=0 or 1 beep=1

Wait 1 second Silence

Count beeps for the second digit Long beep=0 or 1-9 beeps

Wait 1 second Silence

Count beeps for the third digit Long beep=0 or 1-9 beeps

The unit automatically exits to standby mode

Counting the beeps

--

The number of beeps indicates the value of each digit. All three

digits together gives the number of user cards that have already been programmed.

See the examples on page 8.

*See page 10, "System Reset," for instructions on clearing all cards from memory.

___________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________

___________________________________________________________________________________________________________________

________________________________________________________________________________________

______________________________________________________________________________________________________________________________________________

___________________________________________________________________________________________________________________

______________________________________________________

________________________________________________________________________________________________________________________________________________________________________________

___________________________________________________________________________________________________________________

___________________

___________________________________________________________________________________________________________________________________________________________________________________________________________________

___________________________________________________________________________________________________________________

76

Programming: