Owner manual

VIKING TECHNICAL SUPPORT 1.800.908.0884

Open

Limit

! TECHNICAL TIP: The Limit LEDs will illuminate solid when the gate reaches the

corrisponding limit switch on the gate operator. Both LEDs will flash. indicating a

problem with the limt switches or wires.

! IMPORTANT: The gate operator (excluding i-8 model) uses mechanical limit switches

and therefore the limits cannot be set electronically by this controller. The Limit

Buttons on the control board have been rendered inactive by the controller. Refer to

the gate operator’s Installation Manual (G-5, X-9 or i-8) for specific instructions on

how to set the limits for the gate operator model chosen.

LIMIT INDICATIONS

“Open Limit” LED

indictates the gate

is at the open limit.

“Close Limit” LED

indictates the gate

is at the close limit.