CVT-OPTW Operations Manual Wiegand Splitter EXP-1000 Part 15 Class A CVT-OPTW_MAN_111711
Electrical and Mechanical Specifications Physical 2.313” x 1.625” x 0.625” - Temp Storage(-55˚C to + 150˚C) Operating(-40˚C to +80˚C) Humidity 95% (non-condensing) Input Power Data I/O +5VDC @100mA Output Interface Reader 0- 30VDC LED - 0 - 30VDC Analog 0 - 5 VDC FCC Part 15 COMPLIANCE This device complies with part 15 of the FCC Rules.
The CVT-OPTW is designed to provide isolation between different Wiegand signal sources. The CVT-OPTW allows multiple readers and panels to be connected together The CVT-OPTW also allows systems with different voltage levels to be electrically connected together.
+5 VDC Data 0 IN Ground Data 1 IN Data 0 OUT Data 1 OUT Ground Previous versions of the CVT-OPTW had internal pullup resistors internal connected to the output ports. These pullup resistors were wired to the +5VDC supply. This newer version provides the option of connecting the pullup resistors in order to allow connection as a true open collector output. With the pullup resistors connected as indicated in the above diagram, the new OPTW is equivalent to the previous version.
Card Reader Access Control Panel 2 readers connecter to 1 panel Card Reader Card Reader Access Control Panel 1 Reader connecter to 2 panels Access Control Panel
