Instruction Manual

6300-065-Z-7-12
2
SPECIFICATIONS 1
ASTM F2200 Standard for Gate Construction
Important Safety Instructions
Instructions regarding intended installation:
Important Notices
UL 325 Entrapment Protection
Glossary
Swing Gate Requirements
Swing Gate Protection
4
4
4
5
6
7
8
9
SECTION 1 - INSTALLATION 10
10
10
11-12
13
13
14
14
14
15
1.1 Operator Position
1.2 Post Mount or Pad Mount Base Assembly
1.3 Underground Conduit Requirements
1.4 Pad Mount
1.5 Post Mount
1.6 Arm and Gate Bracket Installation
1.7 Manually Adjust the Open and Closed Gate Positions
1.8 Installation of Warning Signs
1.9 Gates Opening Wider Than 90°
SECTION 2 - AC POWER TO OPERATOR(S) 16
16
16
17
2.1 High Voltage Wire Runs
2.2 High Voltage Terminal Connection
2.3 Bi-Parting Gates Wiring - Dual Gate Operators
SECTION 3 - ADJUSTMENTS 18
18
19
20
21
22
22
3.1 4502 Circuit Board Description and Adjustments
3.2 DIP-Switch SW 1 Settings
3.3 DIP-Switch SW 2 Settings
3.4 Automatic Open / Close Limit Adjustment
3.5 Clutch Adjustment
3.6 Inherent Entrapment Protection System
TABLE OF CONTENTS