Instruction Manual

Installation and Maintenance Manual
v D0119, Rev. F
Table of Contents
Introduction ....................................................................................................................vii
Warranty Registration...................................................................................................viii
Available Models and Features……………………………………………………………...1-2
I. Safe Gate Design
Important Information......................................................................................................3
Entrapment Protection Schematic..................................................................................4
Install an Automatic Operator only When: ....................................................................5
Important Instructions for Gate System Owners & Users ............................................6
II. Installation
Tools Required – Getting Started with an Automated Gate System.........................7-8
Installation Preparations and Installation .................................................................9-12
Mechanical & Hydraulic Adjustments ..........................................................................13
Technical Drawings...................................................................................................14-16
III. Smart Touch Set up
Basics of Using the Smart Touch Controller ..........................................................17-18
Installation Configuration for Smart Touch Controller ...............................................18
Wiring Control Inputs to the Smart Touch Controller............................................19-20
Connecting a Master/Slave Pair or an Interlocked Pair ..............................................21
Table of User and Installer Menu Functions ...........................................................22-23
User Menu: Description Functions Available ..............................................................24
Installer Menu: Description Functions Available....................................................25-26
Correctional Facility – User Optional Wiring ...............................................................27
Options for User Programmable Output Relays.....................................................28-29
Setting the Time and Date on the Clock.......................................................................29
IV. Entrapment Protection
Entrapment Protection Schematic................................................................................30
UL 325 Standard Requirements for Entrapment Protection Devices ........................31
Placement and Use of Secondary Pedestrian Entrapment Sensors..........................32
Installing Gate Edge (Contact Type) Reversing Sensor .............................................33
Installing Photoelectric (Non-Contact) Sensor.......................................................34-35