Owner's manual

1812-162-G-12-10
24
• Through the internet with a static IP address. This is a Wide Area Network (WAN) connection and will require a router
and a DSL or cable modem with an internet connection.
• Through the internet with a dynamic IP address. This is a Wide Area Network (WAN) connection and will require a
router and a DSL or cable modem with an internet connection. You will also need a registered DDNS host name.
SOFTWARE
INSTALLED
Through the Internet (WAN)
MOD
EM
/ TCP EN
B
1972-010
SW1
1
2
3
4
5
6
7
8
B
AD
DNS
LA
N
DOWN
RS-
4
85
RX
J4
ON
J1
RJ-
45
Jack
(Cat5)
SOFTWARE
INSTALLED
DSL Modem or
Cable Modem
PC with Internet Access
Laptop with Internet Access
(Wireless is optional)
Internet
Phone Company or
Cable Company Input
R
J-45
R
J-45
R
J-45
RJ-45
Cable
(Cat5)
Internet
1
2
3
4
Cat
5
Cat
5 for LAN Connection
Cat
5 for WAN Connection
Wired or Wireless Router
(Wireless shown)
Maximum distance on
Cat5 wire run is limited
to 325 feet (100 meters).
Router address: 192.168.001.001
Note: 1812 address is set to
192.168.001.030
(See 2.3.2 Set the 1812 IP
address). The 1812 address
must be “unique” within the
LAN network. This allows a
computer to locate the 1812
within the LAN.
Note: The gateway address must set into the
1812. This allows the 1812 to “register” with the
LAN 192.168.001.001
(See 2.3.4 Set the gateway (router) IP address).
Note: Connect to the 1st 1812
Access Plus when multiple units
are connected together.
A computer searches
for 192.168.001.030
in the network.