Manual

1603-065-T-4-13
30
8.2 Fan Kit
An optional fan kit (P/N 1601-093) is recommended in hot humid
climates to prevent heat and moisture build-up inside the housing.
Connect the fan power wires.
Mount fan using 3 existing
threaded studs and lock
nuts supplied. Slide
mounting tabs over
existing air duct.
Keep intake vents clear of debris.
2
4
Fan switch settings.
OFF - Turns the fan off.
ON - Turns the fan on continuously.
AUTO - Normal setting. Automatically turns the fan
ON when the temperature rises above 90°F inside the
housing, and turns the fan OFF when the temperature
drops below 90°F.
5
Existing
Air Duct
Neutral
Mounting
Tab
Mounting
Tab
Hot
115 VAC
DANGER
HIGH VOLTAGE!
12
Lock Nut
Lock Nut
Lock
Nut
Threaded
Housing Studs
(Existing)
Threaded
Air Duct
Stud
(Existing)
Air
Flow
3
Intake Vents
Wire Stays
Exist
in
g
Air Duct
Existing Wire Restrainers
Exhaust Vents
2
4
5
Route fan wires as shown. Use supplied
wire stays and existing wire restrainers.
Keep wires clear of all moving parts.
3
Shut off AC power to operator.
Turn off DC power switch on certain models.
1
1