User Manual

1601-065-L-3-13
36
8.4 Accessories Parts List
The following accessories are available for 1601 and 1602 barrier gate operators.
Loop Detector - Plug directly into ports on circuit board simplifying wiring.
P/N 9410-010 - Single channel detector.
P/N 9409-010 - Two channel detector.
Loop Wire - XLPE insulation is available in 500 and 1000 foot rolls, available in Black, Blue and Red insulation.
Loop Sealant
P/N 2600-771 Asphalt
P/N 2600-772 Concrete
Manual Release Kit for the 1601 or 1602 - Installs on operators WITHOUT the convenience open. P/N 1601-270
Meg Ohm Meter - Checks the integrity of ground loops. P/N 9401-045
Interconnection Cable - Interconnection cable contains all the necessary wires to interconnect primary / secondary operators.
Cable length: 30 ft. - P/N 2600-755 40 ft. - P/N 2600-756 50 ft. - P/N 2600-757
High Voltage Kit - Alter the input AC voltage on a 115 VAC 1601/1602 to 208, 230, 460 or 575 VAC. P/N 2600-266
Reverse Edge - Installs on the bottom of the arm. P/N 8080-016 - 6 ft. Available from DoorKing to fit all arm lengths.
Photo Cell - Prevents arm from lowering on vehicles or pedestrians. P/N 8080-018
Manual Gate Control Toggle - Allows user to manually operate gate arm. Fits inside single-gang electrical box. P/N 1200-017
Time Clock - 7 and 365 day clocks, used to automatically open gate at pre-set time, fits inside operator.
P/N 2600-791 7 day clock
P/N 2600-795 365 day clock
Surge Devices - Helps prevent circuit board failure caused by lightning strikes and power surges.
P/N 1879-080 - High Voltage
P/N 1878-010 - Low Voltage
Replacement Battery - Convenience open system. P/N 1801-009 (2 required)
Speed Bump - Prefabricated 6-foot speed bump reduces traffic speed through gate system. P/N 1610-150
Heater Kit - Thermostatically controlled heater for cold weather areas. 115 VAC - P/N 1601-092
Fan Kit - Thermostatically controlled fan for hot humid environments. P/N 1601-093
Gate Trackerâ„¢ - Optional control board allows the barrier gate operator to report activity to a companion 1833, 1835, 1837 or
1838 access control system.
Wood Arm Only - 14-foot replacement wood arm. P/N 1601-348
Wood Arm Mounting Kit - Wood arm mounting bracket, hub and mounting hardware. P/N 1601-240
Wood Folding Arm Kit - Low headroom applications (Arm included). P/N 1601-384
Plastic Arm Only - 12-foot replacement plastic arm. P/N 1601-571
Plastic Arm Mounting Kit - Plastic arm mounting bracket, hub and mounting hardware. P/N 1601-241
Plastic Folding Arm Kit - Low headroom applications (Arm included). P/N 1601-383
Aluminum Arm Only - 14-foot replacement aluminum arm. P/N 1601-516
Aluminum Arm Mounting Kit - Aluminum arm mounting bracket, hub and mounting hardware. P/N 1601-242
Aluminum Folding Arm Kit - Low headroom applications (Arm included). P/N 1601-610
20 Ft 3-Piece Aluminum Arm Kit - For the 1602 barrier gate operator ONLY. P/N 1602-162
24 Ft 3-Piece Aluminum Arm Kit - For the 1602 barrier gate operator ONLY. P/N 1602-164
27 Ft 3-Piece Aluminum Arm Kit - For the 1602 barrier gate operator ONLY. P/N 1602-166
(Aluminum arm mounting brackets, hubs and mounting hardware included in all 3-piece aluminum arm kits)
20 Ft 3-Piece Wood Arms Only - For the 1602 barrier gate operator ONLY. P/N 1602-340
20 Ft 3-Piece Wood Arms Mounting Kit - Wood arm mounting brackets, hubs and mounting hardware for 20 ft 3-piece wood
arms. P/N 1602-041
Foam Padding for 14 Ft Arm - Foam padding for the aluminum or wood arm. P/N 1601-260