Owner manual

7
Fig.01
Fig.02
These instructions apply to the following models:
740 24V
The 740 gearmotor is an electro-mechanical operator designed for moving sliding
gates.
The non-reversing reduction system ensures the gate is mechanically locked
when the gearmotor is not operating, therefore it is not necessary to install any
electric lock
AUTOMATED SYSTEM 740-24V
A convenient manual release with customised key makes it possible to move the
gate in the event of a power failure or malfunction of the operator.
The 740 gearmotor was designed and built for controlling vehicle access. AVOID
ANY OTHER USE WHATEVER.
1. DESCRIPTION AND TECHNICAL SPECIFICATIONS
LEDOMV42-047
ylppusrewoP
zH06/05~V511/032
)W(rewopdebrosbA
07
)A(tnerrucdebrosbA
3
)Fµ(roticapaC
-
)Nad(noinipn
otsurhT
04
)mN(euqroT
5.31
)C°(noitcetorplamrehtgnidniW
-
)gK(thgiewxamfaeL
004
noinipfoepyT
61Z
)nim/m(deepset
aG
21
)m(htgnelxametaG
51
hctiwstimilfoepyT
lacinahceM
hctulC
cinortcelE
ycneuqerfesU
%001
)C°(erutarepmetgnita
repO
55+02-
)gK(thgiewrotomraeG
5.8
ssalcnoitcetorP
44PI
snoisnemidllarevorotomraeG
20.giFeeS
1. Motor lid
2. Electronic control unit
3. Release device
4. Gearmotor body
5. Foundation plate
6. Pinion
7. Limit switch
8. Transformer
9. Cable holes
10. Battery (optional)
11. Protective side panels
Values are expressed in mm
2. DIMENSIONS