Instruction Manual

Page 17
June, 2004
750 Operator And
455 D Control Panel Installation Manual
750 PARTS LIST
POS PART NO. DESCRIPTION QTY
1 N/A Bolt (10mm x 25mm) 2
2 N/A Lock washer 2
3 7091045 Piston Ring 2
4 7350155 Piston 2
5* 7193055 750 Rack (100 degree) 1
6 N/A O-Ring (26.70mm x 1.78mm) 2
7 7099195 Gasket (Cylinder) 2
8 N/A Bushing 2
9 2339 Bearing (Thrust) 1
10 2480 Bearing (6006) 2
11 7191525 Pinion 1
12 2550 Snap Ring 1
13 7093035 Seal (Top) 1
14 7309095 Splined Collar 1
15 7039125 Dust Cover 1
16 N/A Cover Plate 1
17 7270415 Box Lid (750 Half Box) 1
18 N/A Self-tapping Screw Stainless
Steel (3.9mm x 9.5mm)
6
19 N/A Lock Washer (Stainless Steel) 6
20 7223205 Half Box 2
POS PART NO. DESCRIPTION QTY
21 N/A Bolt (8mm x 100mm) 4
22 N/A Lock Washer 12
23** 7366235 Cylinder (100 degree) 2
24 N/A O-Ring (66.4 mm x 1.78 mm) 2
25 7170275 Flange (Right Side) 1
26 7246025 Zert Fitting (Air Drain 2
27 7110045 Dust Cover (Zert Fitting) 2
28 N/A Bolt (8mm x 105mm) 8
29 710101002 Elbow 2
30 7102055 Ferrule Fitting 2
31 N/A O-Ring (50.52mm x 1.78 mm) 1
32 7200165 Bearing Cup (Bottom) 1
33 7287515 Leveling Plate 1
34 701217 Leveling Bolt (12mm x 35mm) 4
35 7170285 Flange (Left Side) 1
36 7161745 Body 1
37 39050915 Skin Pack 1
38 2171* Seal Kit (750 Drive Unit) 1
39 6105* Monolec Oil (1 Qt) 1
∗ 750 Rack 180 degree Part # 7193065
∗ * 750 Cylinders 180 degree Part # 7366245