User Manual

Page 23
January, 2007
620/640 Operator And
624BLD Control Panel Installation Manual
THE 624 BLD CONTROL PANEL
THE 624 BLD CONTROL PANEL INSTALLATION INSTRUCTIONS
TECHNICAL SPECIFICATION
Supply Voltage 115/230 VAC (+6% -10%)
Absorbed Power 7 Watts
Accessory Voltage Supplied 24VDC
Fuse Ratings 500mA
Logics A, A1,E,P,PA,CN,CA,RB,C,R,CU
Motor Run Time Programmable (0-4 minutes)
Pause Time Programmable (0-4 minutes)
Motor Power Programmable (50 levels)
Connectors on Board Limit Switches, Loop Detector, Break Away Beam Sensor
Radio Plug In FAAC Plug In Radio Receiver
Programming Buttons 3 Buttons (+, -, F)
Programming Functions Logics, Pause Time, Work Time, Deceleration Time, Torque, and Loop 1 & 2.
DL Display for Programming/Diagnostics
LED Input Status LEDS (Light Emitting Diodes)
J1 Low Voltage Terminal Strip
J2 Terminal Strip For Motor, Fan, Warning Light
J3 Open Limit Switch Quick Connector
J4 Radio Receiver Plug In
J5 Closing Limit Switch Quick Connector
J6 Break Away Beam Sensor Quick Connector
J8 Capacitor Quick Connector
J9 Main Power Terminal Strip
J11 Loop Detector Quick Connector
F1 5 Amp (Motor Fuse)
F2 500mA (Accessory Fuse)
F Program Push Button “F”
+ Program Push Button “+”
- Program Push Button “-”
TF1 Transformer
Figure 1C. 624 BLD Control Panel