Owner manual

Page 13
July, 2006
390 24v Operator And
425 D Control Panel Installation Manual
Parts List
390 24v Operator
POS PART NO. DESCRIPTION QTY
2 N/A Operator body 1
5 727292 Protective Cover 1
6 N/A Manual Release Assembly (Inner) 1
7 N/A Gear (Upper) 1
8 N/A Gear (Lower) 1
10 713001 Key (Manual Release Lever) 1
11 718189 Gear (Main Drive Shaft) 1
12 N/A Bushing Brass (Upper) 1
13 N/A Manual Release (Outer) 1
14 722471 Mounting Frame 1
15 N/A Bushing Brass (Bottom) 1
16 N/A Fender Washer 1
17 N/A Motor 24VDC 1
20 N/A Motor Housing 24VDC 1
21 N/A Snap Ring 1
22 N/A Seal (Lower) 1
23 6202 Bearing (Sealed) 4
24 6206 Bearing (Sealed) 2
25 N/A Nut (8mm x 1.25mm x 6.5mm) 1
26 N/A Spacer 1
27 N/A O-Ring (2.62mm x 61.60mm) 1
28 N/A Washer (8mm x 2mm) 1
29 N/A Snap Ring 1
30 N/A Snap Ring 1
31 N/A “C” Clip 1
32 N/A Screw Self Tapping (3.5mm x 9.5mm) 3
33 N/A Bolt (8mm x 110mm) 2
34 N/A Bolt (5mm x 16mm) 3
35 N/A Screw Cap (6mm x 70mm) 3
36 N/A Screw (4mm x 10mm) 3