User Manual

2
INTRODUCTION
The SK1-H is a single- entry multi-function Access Controller with integrated keypad and card reader. It is
designed and manufactured to perform in a wide range of indoor, outdoor, and harsh environments.
The SK1 supports up to 1000 users in multiple access configurations (Card, Card or PIN, or Card + PIN). The
built in card reader supports HID 125KHz frequency cards. The relay can operate in Pulse Mode (suitable for
access control) or Toggle Mode (suitable for arming/disarming alarms, switching lights, machines….etc)
The SK1-H offers advanced programming features like: Duress PIN/card; Block enrollment; Wiegand 26~37
bits interface. These features make it an ideal choice for door access not only for small shops and domestic
households but also for commercial and industrial applications such as factories, warehouses, laboratories,
banks and prisons.
Features
 Waterproof, meets IP66
 Vandal Resistant Metal Enclosure
 One Programmable Relay Output
 Stand Alone or Pass-Through Operation
 1000 Users (Card/ Card or PIN /Card+PIN)
 10 Panic Card/PIN Codes
 Latch Mode to hold door or gate open
 Wiegand 26~37 bits input & output
 Card Block enrollment
 Integrated Alarm Buzzer & Output
 Low power consumption (55mA)
 Anti-Tamper Alarm
 Backlit Keypad
 Multi-color LED status display
 12-24V DC/ 12-18V AC Power input
Specifications:
User Capacity
Normal User
Panic User
1010 Cards/PINS
1000
10
Operating Voltage
Idle Current
Active Current
12~24V DC/ 12-18V AC
55mA
80mA
Keypad
PIN length
12 Key (3*4)
4-6 digits
Proximity Card Reader
Radio Technology
Read Range
HID
125KHz Industry Standard Proximity Card
3- 6cm
Wiring Connections Electric Lock, Exit Button,
DOTL, External Alarm, Wiegand (in/out)
Relay
Adjustable Relay Output Time
ONE (NO, NC, COM)
1-99 Seconds (5 seconds default)