User's Manual

ManualsBrandsControlled Entry Distributors ManualsElectronicsRemote Controller

1/4

6-1621769 rev00 07/06/2017

The Transmitter Solutions - TRAPLUS915ALP3K transmitter is a key chain

style mini transmitter operating at 915 MHz. It has been designed for the

control of automatic closing systems and anti-burglar systems, thanks to its

very high security coding system Rolling Code.

The code sent by the transmitter changes at each activation, avoiding any

scanning and copying risk. A special algorithm allows to keep synchronized

transmitter and receiver.

The CR2032 battery of the transmitter have a shelf life of about 24 months.

The product fully complies with Part 15 of FCC Regulations.

3 CHANNELS TRANSMITTER

TRAPLUS915ALP3K

Thank you for choosing this Transmitter Solutions product.

Please read this manual carefully before installing the product.

CONTENTS

1. TRANSMITTER OVERVIEW

1A - General information

1B - Technical specication

1C - Main components

2. NUMBERING

3. PROGRAMMING

4. OPERATION

5. BATTERY ACCESS

6. TROUBLESHOOTING

1A - General information

Summary of content (5 pages)

PAGE 1
3 CHANNELS TRANSMITTER TRAPLUS915ALP3K Thank you for choosing this Transmitter Solutions product. Please read this manual carefully before installing the product. CONTENTS 1. TRANSMITTER OVERVIEW 1A - General information 1B - Technical specification 1C - Main components 2. NUMBERING 3. PROGRAMMING 4. OPERATION 5. BATTERY ACCESS 6. TROUBLESHOOTING 1A - General information The Transmitter Solutions - TRAPLUS915ALP3K transmitter is a key chain style mini transmitter operating at 915 MHz.
PAGE 2
1B - Technical specifications Operating frequency: Number of keys: Battery: Battery life: Security Code: Number combinations: Operating temperature: Overall dimensions: Weight (with battery): 915 MHz 3 3V lithium battery CR2032 18 - 24 months Rolling Code 2exp256 23°F - +131°F (-5°C - +55°C) 2.46’’ x 1.26’’ x 0.39’’ (62.4 x 32 x 10 mm) 0.54 oz. (15.4 gr.
PAGE 3
2 - NUMBERING Each transmitter is manufactured and sold with a different factory-set serial number. 3 - PROGRAMMING The transmitter must be programmed into your system memory. Your own installer or reseller will provide you the necessary instructions for your system. 4 - OPERATION A- Firmly depress the button until the red LED illuminates. B- After the LED has illuminated, release the button.
PAGE 4
Transmitter Solutions - Type: TRAPLUS915ALP3K FCC ID: SU7PLUS915ALP3K This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
PAGE 5
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 & 74 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.