User's Manual

CDVI Wireless SPA VIA PIAVE, 23- 31020 S.PIETRO DI FELETTO (TV) – ITALY
Tel. [phone] R.A. – Fax. [phone] I. 03023780269
internet: www.erone.com - e-mail: [e-mail]
TCF-160 07/2015 Pag 7 of 23
4.0 Description
4.1 Master password
The keypad has a Master Password factory-set to “11111”. No radio signal can be transmitted
until the Master default Password hasn’t been changed. The Master Password and the User code
can have up to 5 digits. If the chosen string is shorter than 5 digits, press the key “#” after the last
digit, to complete the number, as indicated below:
Example 1 : User code 123 - Dial: 1,2,3,#.
Example 2 : User code 1234 - Dial: 1,2,3,4,#.
Change master password
NOTE :
After 8 wrong dials of the master Password, the system disables the password and requests the
dialing of the PUK code ( Password Unblocking Key)
The procedure can be followed even if the Master Password is lost, in order to reset the security
factory configuration.
4.2 Transmission
For the transmission, first dial the User Code ( not the Master Password) and then press the key to
activate ( 1 , 2, 3, 4, 5, 6)
During the transmission the LED blinks and the buzzer sounds a “Beep - Beep“
EXAMPLE:
User password = 12345
Channel 1.
Dial : 123451
NOTE : The key “*” cancels the dialing; the key “ # “ repeats the last command ( within 20 sec. )