User's Manual

INTRODUCTION
The DOL1000-433RC4 is a versatile keypad that has the option of running wirelessly. The keypad-
can work with 6 volts of battery power or 6-24 volts of AC/DC. It can store up to 1000 access
codes. Guest access codes are also programmable, which are single-use codes for access.
After 5 successive incorrect codes, the keypad will lock for 4 minutes.
The very first time that you apply power to the keypad, you will hear a series of beeps followed by
a regular repeating beep (1 beep at 3 second intervals) that lets you know you are in programming
mode:
Enter a 4 digit Master Code that only you will use for programming purposes.
Write Master Code here
You can now add up to 1000 access codes as well as a flash code (for one use only).
To add Access Code
1934
To add Access Codes for
channel 2, 3, and 4 -
2413, 888 and 9743
(you may add up to 1000
different codes)
Example - Master Code 1234
Access Code:
Master Code
1 2 3 4 1 9 3 4
Sub Mode Access Code Channel Exit
1 # 1 #
To remove Access Code
1934
Master Code
1 2 3 4 1 9 3 4
Sub Mode Access Code Exit
2 # #
To change Master Code
from 2580 to 1234
Master Code
1 2 3 4 4 3 2 1
Sub Mode New Master Code Exit
7 # #
To clear all Access, Flash
and Latch codes
Master Code
1 2 3 4
Sub Mode
8 #
To add Flash Code 4437
(for one use only)
Master Code
1 2 3 4 4 4 3 7
Sub Mode Flash Code Channel
3 # 1
Master Code
1 2 3 4 2 4 1 3
Sub Mode Access Code Channel Exit
1 # 2 #
8 8 8 8 3 #
9 7 4 3 4 #
beep -