DOL1000-433RC4 Programming & Installation Manual
INTRODUCTION The DOL1000-433RC4 is a versatile keypad that has the option of running wirelessly. The keypad can work with 6 volts of battery power or 6-24 volts of AC/DC. It can store up to 1000 access codes. Guest access codes are also programmable, which are single-use codes for access. After 5 successive incorrect codes, the keypad will lock for 4 minutes.
-Channel 433 MHz Receiver Antenna Inside Back Outside Back Part # Part No: DOL1000-433RC4 FC 0001 SN 12345 Part No: DOL1000-433RC4 FC 0001 SN 12345 Facility Code
PROGRAMMING THE DOL1000-MF with 433 MHz Module Default Master Code: 1 2 3 4 1 2 3 4, 1#, Access Code: __ __ __ __ , Channel:1 # (Repeat for channel 2, 3 & 4) Example: Add Access Codes (Using Channel 1) STEP 1: Press 1 2 3 4 STEP 2: Press 1 # STEP 3: Enter access code __ __ __ __ STEP 4: Press 1 # (multiple beeps confirm) STEP 5: Press * * STEP 6: Test new access code. __ __ __ __ (Green light will flash 6 times confirming that the new access code has been accepted.
