User's Manual

ManualsBrandsControlled Entry Distributors ManualsElectronicsENTRY REMOTE CONTROL

Table Of Contents

1A - General information

The Community Controls - Monarch 433TSPW2KC is a 2

buttons key chain style mini transmitter operating at 433,92 MHz.

It has been designed for the control of automatic closing systems and

anti-burglar systems, thanks to its very high security coding system

(KeeLoq® Hopping code).

The code sent by the transmitter changes at each activation, avoiding

any scanning and copying risk. A special algorithm allows to keep

transmitter

CONTENTS

1A - General information

1B - Technical specifications

1C - Main components

1 - TRANSMITTER OVERVIEW

2 - NUMBERING

3 - PROGRAMMING

4 - OPERATION

5 - BATTERY ACCESS

1B - Technical specifications

Operating frequency 433,92 MHz

Number of keys: 2

Battery : 2 x 3V lithium batteries CR2016

Battery life: 18 ÷ 24 months

Security code: Keeloq® Hopping code

Number combinations : 2exp64

Operating temperature: -20°F÷+131°F (-20°C÷+55°C)

Overall dimensions: 2.4”x1.4”x0.51” (61x36x13 mm)

Weight: 0.49 oz. (14 gr.)

synchronized transmitter and receiver.

The transmitter can operate with many receivers of the range

Community Controls - 433R. Ask your installer or reseller the product

which best fits your application. The output of the receivers can be either

wiegand 26 bit ( to communicate with access control systems ) or 1-2-4

relay with NO - NO/NC output. The CR 2016 lithium batteries of the

transmitter have a shelf life of about 6 months. The product fully

complies with Part 15 of FCC Regulations and the European Directives

1C - Main components

Red

LED

Key

holder

ring

Dark red

push-button

6 - TROUBLESHOOTING

Manual

MONARCH 433TSPW2KC

Dark grey

case

Fig. 2

Thank you for choosing a Community Controls product .

Please read this manual carefully before using the product.

Community

Controls

Summary of content (2 pages)

PAGE 1
MONARCH 433TSPW2KC ua an M l synchronized transmitter and receiver. The transmitter can operate with many receivers of the range Community Controls - 433R. Ask your installer or reseller the product which best fits your application. The output of the receivers can be either wiegand 26 bit ( to communicate with access control systems ) or 1-2-4 relay with NO - NO/NC output. The CR 2016 lithium batteries of the transmitter have a shelf life of about 6 months.
PAGE 2
- NUMBERING Each transmitter is manufactured and sold with a different factory-set serial number . [ * ] : Depends on batteries type and operating conditions . Batteries life calculated with 1-sec pulses. 7 - TROUBLESHOOTING 3 - PROGRAMMING The transmitter must be programmed into your system memory. Your own installer or reseller will provide you the necessary instructions for your system. 4 - OPERATION A - Firmly depress the button until the small red LED illuminates.