User's Manual

TSR-UL-0061-1.3
CHAPTER 1 : Introduction
2
1.1 Terminal specifications
emerald is available in three models; the TS100, TS200 and TS300. For the purposes of
UL294, the connection and wiring for the access control function are identical for all three
emerald models. All three models provide the same access control functionality,
however the TS200 and TS300 provide additional intercom and remote application
functions that are not evaluated by UL and are not for use on UL installations.
Note
The emerald terminal is for indoor use only.
1.1.1 CEM emerald product codes
Contact CEM sales for further information.
Note
The typical read range for the integrated 13.56MHz read-head is 3 – 5cm (1.2” – 2”)
Supported card technologies
The emerald multi smart-card reader supports the following card technologies:
• CEM DESFire
• MIFARE CSN
• iClass
Important
The appropriate card definitions must be loaded onto the CEM Central Database Computer (CDC).
Card technology TS100 TS200 TS300
FCC ID
IC ID
Mifare CSN TSR/100/105 TSR/200/105 TSR/300/105 QABTSR105V910
12009A-
TSR105V910
Picopass TSR/100/106 TSR/200/106 TSR/300/106 QABTSR608V93E
12009A-
TSR608V93E
CEM DESFire TSR/100/107 TSR/200/107 TSR/300/107 QABTSR608V93E
12009A-
TSR608V93E
iClass/iClass SE TSR/100/108 TSR/200/108 TSR/300/108 QABTSR608V93E
12009A-
TSR608V93E
multi smart-card
reader
TSR/100/608 TSR/200/608 TSR/300/608 QABTSR608V93E
12009A-
TSR608V93E
Table 1: List of CEM emerald product codes