User's Manual
Table Of Contents
- Introduction
- Supported card technologies
- Mounting the Terminal
- Drilling the back casing
- Wiring the Terminal
- Fail safe lock
- Fail secure lock
- External power
- Internal power
- Power connections
- Input configuration
- Inputs not in use
- Ethernet cable ferrite
- Power connections
- Typical Wiegand read head wiring
- Input configuration
- Inputs not in use
- Ethernet cable ferrite
- Terminal Network Configuration
- Using the Terminal
- Diagnostics and Testing
- Network
- Versions
- Database
- Configuration
- Unit information
- Input tests
- Network tests
TSR-UL-0061-1.3
CHAPTER 6 : Diagnostics and Testing
32
6.2 Accessing the System Configuration Menu
The diagnostic and testing functionality is accessed via the configuration menu.
1. Slowly swipe a finger across the date/time from left to right.
2. When prompted to enter passcode type 6767000.
Note
See Accessing the System Configuration Menu on page 24 for more details on passcodes..
Figure 24 Accessing the configuration menu
The system configuration menu has three sub-menus, each of which contains specific terminal
maintenance functions. The System information and Tests menus are used for the purposes
of testing and fault finding.
Figure 25 The system configuration menu
Access useful
information about the
terminal
Administer tests to
check terminal
functionality