User's Manual
Table Of Contents
- Introduction
- Supported card technologies
- Mounting the Terminal
- Drilling the back casing
- Wiring the Terminal
- Fail safe lock
- Fail secure lock
- External power
- Internal power
- Power connections
- Input configuration
- Inputs not in use
- Ethernet cable ferrite
- Power connections
- Typical Wiegand read head wiring
- Input configuration
- Inputs not in use
- Ethernet cable ferrite
- Terminal Network Configuration
- Using the Terminal
- Diagnostics and Testing
- Network
- Versions
- Database
- Configuration
- Unit information
- Input tests
- Network tests
TSR-UL-0061-1.3
CHAPTER 2 : Mounting the Terminal
10
Drilling the back casing
Figure 8 emerald™ back casing drill hole dimensions
Mounting hole Description
A Generic positions for wall mounting. These holes are accessible when
the I/O board is in place.
B UK single back box.
C US Single back gang electrical junction box.
D UK double back box mounted vertically.
E 75mm (3”) VESA mount.
Table 5: emerald mounting descriptions