User's Manual
Table Of Contents
- Introduction
- Supported card technologies
- Mounting the Terminal
- Drilling the back casing
- Wiring the Terminal
- Fail safe lock
- Fail secure lock
- External power
- Internal power
- Power connections
- Input configuration
- Inputs not in use
- Ethernet cable ferrite
- Power connections
- Typical Wiegand read head wiring
- Input configuration
- Inputs not in use
- Ethernet cable ferrite
- Terminal Network Configuration
- Using the Terminal
- Diagnostics and Testing
- Network
- Versions
- Database
- Configuration
- Unit information
- Input tests
- Network tests
7
Chapter 2
Mounting the Terminal
Important
Care must be taken when working around mains electricity.
The emerald terminal can be mounted on a variety of standard electrical back boxes:
• UK single back box
• US single gang electrical junction box
• UK double back box mounted vertically
• 75mm (3”) VESA mount
2.1 Preparing for mounting
Care must be taken with the internal components when disassembling the terminal.
2.1.1 Recommended tools
• 3 mm (0.1”) slot screwdriver for input/output connections and DC supply
• Wire cutters and strippers
• Security hex socket screwdriver
Product CEM Product Code
Security screwdriver handle HTO/000/001
Security screwdriver bit HTO/000/000
Table 4: Security screwdriver product codes